Understanding Retractable Canopy Systems

Understanding Retractable Canopy Systems

When determining the size and type of a retractable canopy system, there are a few things to consider. First, the width of the canopy should be, at most, the length of the beam. Otherwise, the system can become unstable and jam. Another thing to consider is the overall design for compliance, which must be addressed if the width of the canopy is greater than the length of the beam.

Slide On Wire Canopies

If you want to install a Slide on Wire retractable canopy system, you will first need a ladder. From the ladder, drill three equidistant pilot holes in the beam, slightly smaller than the eye screws. You will also need to allow a one-inch space above the holes to clear any structural components. Next, cut the wire rope into three lengths, each equal to the distance between the eyes plus ten percent. You will need to loop these wire ropes around the eye screws, securing them to the structure.

The first step is to figure out the size of the panels. Most wire-hung panels are 60 inches wide, so if you want to cover ample space, you will need several panels. It is best to place them three inches apart. You can also use the canopy calculator to estimate the number of panels you need for a given structure.

Lateral Arm Canopies

The Lateral Arm retractable canopy system is the perfect blend of style and function. This innovative system utilizes state-of-the-art design and the highest quality materials to provide reliable sun protection. Upon retraction, the retractable fabric canopy near me seamlessly integrates into the architectural design of the building. Its complete cassette design means less contact wear and noise, and the fabric does not tear or stretch.

Lateral arm retractable awnings are great for patios, decks, and other outdoor areas. They can be rolled out to offer protection from the sun and then retracted to give the outdoor area an open feeling. Some models even feature motor operation, making them even more convenient.

A lateral arm retractable canopy system can be made of multiple panels, which means you can have a canopy with a large or small footprint. You can choose from different styles, colors, and materials to meet the needs of your home.

Floating Frame Two-Track Retractable Canopy Systems

Two-track retractable canopy systems utilize metal tracks with four sides to limit misalignment forces. Because these tracks are mounted inboard the canopy wing tips, they minimize the width and length of the canopy. They can be imposing on aesthetics, however. For example, a 16-foot-wide pergola would require two tracks spaced 10 feet apart and cross beams positioned among the rafters.

Slide on Track canopies offers protection from rain and sun. This type of canopy system utilizes a stainless steel transmission belt to minimize the effect of potential salinity in the air. The belt is powered by a single drive shaft and pulley system, which creates a smooth sliding effect.

Slide On Track Canopies

The Slide on Track retractable canopy system is a great way to create a large canopy with less space. The canopy is made to fit perfectly over a pre-existing structure or on a newly engineered structure. This saves money and reduces waste while still offering excellent flexibility. Its design is based on a motorized system and features a single drive shaft and pulley system that allow it to glide open and close smoothly.

The first step in assembling your Slide on Track retractable canopy is to measure the width of the canopy. You should be able to find the width by measuring the dimensions of your structure and the fabric. Then, you’ll need to measure and cut the wire rope into three equal lengths. Each length should equal the distance between the eye screws, plus 10 percent, and be long enough to loop around the canopy.

Leave a Reply

Your email address will not be published. Required fields are marked *